War & Peace Revival 2015: Photo-Shoots
Miliitary Odyssey 2014: Photo-Shoots
War & Peace Revival 2014: Photo-ShootsMiliitary Odyssey 2013: Photo-Shoots
War & Peace Revival 2013: Photo-Shoots
Overlord 2013: Photo-Shoots
Miliitary Odyssey 2012: Photo-Shoots
War & Peace 2012: Photo-Shoots
War & Peace 2011: Photo-Shoots
Trucks & Troops 2011: Photo-Shoots
Military Odyssey 2010: Photo-Shoots
War & Peace 2010: Photo-Shoots
RT Montana: Life Around Camp 1970
RT Idaho: 1971
RT New York
RT Wyoming BDA Mission 1971
MACV-SOG HALO Teams 1970 -1971

RT Montana 1969
RT Viper One-Zero 1971
RT West Virginia One-One 1971
RT Maine 1970
RT Iowa 1969 - The Golfcourse

MACV-SOG Equipment:

Individual Equipment
Team Equipment
Weapons
Personal Gear
Original MACV-SOG Gear

Australian SASR
Seal Team 1

STEN Mk.IIS (STEN Mark 2 Silenced) submachine gun

 


  

SOG teams would carry a silenced STEN for prisoner snatch missions, it could be taken apart and stored in the rucksack until needed.

The STEN name came out of names of the designers (R. V. Shepard and H. J. Turpin) and from the factory where they worked (Enfield arsenal). It was one of the most crude and ugly and simply, but effective submachine guns of the WW2. Almost 4 millions of STEN guns of different versions were made between 1941 and 1945. STEN guns were made not only in Royal Small Arms factory in Enfield; other makers included famous British gunmaking company of the time BSA Ltd, as well as Royal Ordnance Arsenal in Fazakerly, England, and Long Branch Arsenal in Canada.

The first STEN, STEN Mk.I (full official name was 9mm STEN Machine Carbine, Mark 1), was developed in mid-1941. It was blowback operated, automatic weapon that fired from the open bolt. Trigger unit permitted for sigle shots and full automatic fire, controlled by the cross-bolt type button, located in front and above trigger. The tubular receiver and the barrel shroud were made from rolled steel. The gun was fed from left side mounted box magazines. The stock was of skeleton type, made from steel. Sights were fixed, pre-adjusted for 100 yards distance, peep hole rear and blade front. The Mk.1 featured spoon-like muzzle compensator. Some guns featured small folding forward grip. Total production of Mark 1 and slightly modified Mark 1* STEN machine guns was about 100 000.

The STEN Mk.II submachine gun was most widely made gun in entire STEN series, with about 2 millions of Mark 2 being made during the war. It was slightly smaller and lighter than Mk.I. Basic design was the same as Mark 1, with omission of all wooden parts of Mk.I and shorter barrel jacket, which made the Mk.II lighter than its predecessor. Magazine housing could be rotated for about 90 degrees down to close feed and ejection apertures during transportation and off-battle carry (this feature caused much troubles as the rotary unit was not very durable and magazine could be misaligned during combat, what led to feed malfunctions and jams). Another source of problems was magazine spring, so magazines were routinely loaded with 28-30 rounds instead of "full capacity" 32 rounds to reduce strain on the magazine spring.

Some Mk.II STEN guns were manufactured with integral silencers for undercover operations and were marked as Mk.II(S). These guns had shortened barrels enclosed into integral silencer. The silencer was rather effective so most audible sound when firing Mk.IIS was the clattering of the bolt moving back and forth in the receiver. Contemporary manuals advised that Mk.IIS submachine gun was to be fired in semi-automatic mode; the ful-automatic fire was reserved for emergency situations, as it decreased the service life of silencer significantly.